Author Topic: 408E standard gauge loco..textured paint??  (Read 25440 times)

murph-7

  • Newbie
  • *
  • Posts: 35
  • ......M7
    • View Profile
    • Murph-7 Trains
408E standard gauge loco..textured paint??
« on: March 28, 2021, 12:32:54 PM »
from the shelf, this appears an ordinary apple green 408E..however, there is a rough texture to this one--it looks like sand in the paint/texture nearly throughout the piece....I know Ives did this on accessories and loco`s...did Lionel? this is 100% original Lionel paint..thoughts?

 


 
 



 


 
Murph-7

starfire700

  • Hero Member
  • *****
  • Posts: 760
    • View Profile
    • ebay auctions
Re: 408E standard gauge loco..textured paint??
« Reply #1 on: March 28, 2021, 05:45:23 PM »
I have seen this effect on items that have been exposed to very hot conditions over a period of time, because it is lead-based paint. Do you see any other symptoms of hot storage such as melted wires, may have also affected motor parts. Because the bumps are dark, it looks like the paint is separating.

murph-7

  • Newbie
  • *
  • Posts: 35
  • ......M7
    • View Profile
    • Murph-7 Trains
Re: 408E standard gauge loco..textured paint??
« Reply #2 on: March 28, 2021, 05:51:05 PM »
no melted wires, it runs great but wheels are terrible..so caused by attic heat? this is ashame because it appears used very little..
Murph-7

Terry

  • Administrator
  • Hero Member
  • *****
  • Posts: 912
    • View Profile
    • eBay Auctions
Re: 408E standard gauge loco..textured paint??
« Reply #3 on: March 28, 2021, 08:29:24 PM »
I had a maroon 212 Gondola like that. Marty Visnick told me it was due to the freeze and heat cycles in basements and attics. Looking at the 212 closely it didn't have the same finish as the crackle maroon sides on a 126 station.

CNJRR

  • Full Member
  • ***
  • Posts: 138
  • "The Biggest Little Railroad"
    • View Profile
Re: 408E standard gauge loco..textured paint??
« Reply #4 on: March 29, 2021, 04:38:55 PM »
I like the look. :)